Commercial Fire Alarm Systems Installation & Monitoring Westchester County
Digital Provisions designs, installs, and services business fire alarms systems for commercial buildings in Westchester County, NY. We use state-of-the-art fire detection and alarm system equipment providing you 24/7 professional alarm monitoring.
In Westchester County, commercial buildings need to adhere to local fire alarm requirements that are set by individual cities, as well as the state of New York.
In the City of Yonkers, for example, all business buildings must have an approved automatic sprinkler system or other approved suppression system installed throughout the building covering all areas. The main sprinkler control valve shall be electrically supervised so that the alarm will sound when the valve is closed.
Upon activation of the sprinkler system, it must:
- Cause the fire alarm signal system to sound continuously throughout the building.
- Cause the fire alarm signal to be transmitted to the Fire Department.
- Stop the air supply into the air return from the floor where activated.
- Cause the overriding of the programming for car stops of all automatic elevators serving the floor where activated and bring them nonstop to the main floor.
Businesses must also have a Fire Commissioner approved form of two-way voice communication in the following areas:
- Mechanical control center
- Elevators
- Air-handling control rooms
- Elevator machine rooms
Business buildings must also have an approved fire alarm system installed adhering to the following guidelines:
- At least one sending station shall be located in each story in an accessible position in a natural path of escape.
- All stations shall be located so that no point on any floor of the building is more than 150 feet distant from a station.
- The fire alarm system shall be connected to the local fire department.
This is just an example of some of the fire and safety code requirements businesses in Westchester must adhere to. Additional requirements also include having floor numbers clearly marked in stairwells, and having clear signage throughout buildings.
Fire alarm systems monitoring is vital for commercial buildings because it is a matter of life and death should an emergency occur. Commercial businesses tend to have many individuals inside them at once, especially if it is a multi-level building housing multiple business. Additionally, a fire can damage expensive products and supplies stored in warehouses or storage facilities.
By installing a business fire alarm system in your building, you can protect not only the individuals inside but also your property and merchandise. Call 631-209-2600 to schedule your FREE fire safety assessment.
New York State OGS Contract #PT66947
We Offer the Following Services
At Digital Provisions, we offer fire alarm systems installations and monitoring for companies throughout Westchester County. Our services include:
- Fire Safety Design – Whether you have an existing commercial building or a new construction, we can assist you in designing a fire alarm system that will protect your building and meet local fire safety code regulations.
- Permit Application Submittal – For new constructions or renovated buildings, we can assist in submitting your permit application.
- Fire Detection and Alarm System Installation – Once your new commercial smoke and fire alarm system has been designed, our team can install the system in your commercial building.
- Testing – We can run regular tests on your fire detection and alarm systems equipment to ensure all standard safety conditions are met.
- Inspections – Whether you need yearly or quarterly inspections of your fire equipment you can trust Digital Provisions to ensure your equipment is up to code and running properly.
- Systems Maintenance – We offer service packages that include regular preventative maintenance of your fire alarm system, which can help keep your system working properly and catching potential issues before they become a problem.
- Troubleshooting – In the event a problem does occur, our technicians can come out to your commercial property to diagnose and troubleshoot the issue.
- Repairs – We offer repairs on your existing fire security system in the event something is not working properly or breaks down. We also offer emergency repairs if needed.
Types of Fire Detection and Alarm Systems We Install
There are a few different types of commercial fire detection and alarm systems available to commercial building owners, they include:
Automatic Fire Alarm Systems
Automatic systems, sound the fire alarm and notify your commercial fire alarm monitoring service as soon as a possible fire is detected.
Manual Fire Alarm Systems
Manual systems typically require a person to physically activate the fire alarm, such as by using pull stations in key locations.
Conventional Fire Alarm Systems
Conventional systems can be either manual or automatic, they can divide the building into sections, or zones. Each section then gets its own fire alarm which is connected to the main control panel.
Addressable Systems
Similar to conventional counterparts, addressable fire alarm systems allow each area of the building to have a fire alarm that is connected back to the main control panel. However, with an addressable system, you can see which fire alarm was tripped in order to direct first responders to the problem.
Fire Sprinkler Systems
These sprinkler systems will automatically dispense water or chemical fire retardant as soon as a fire is detected.
Containment Systems
These systems will lock down areas that are affected in order to prevent the spread of fire.
Ventilation Systems
These systems function to remove or reduce smoke and fumes in the problem area to assist with evacuation efforts
The experts at Digital Provisions can help you determine what fire alert system is right for your commercial property. Call 631-209-2600 now to schedule your FREE on-site fire safety evaluation.
Schedule a FREE Site Security Design
Fill out the form and a representative will contact you shortly to schedule your FREE Site Security Design.
Or Call us at 631-209-2600
How Does A Wireless Fire Alarm System Work
Today fire alarm systems utilize automatic functions to detect any indication of a possible fire. This might include receiving a signal from a fire sensor, or smoke, heat or carbon monoxide detector, and automatically transmit the alert to the fire alarm panel.
In wireless fire alarm systems, the signal from the detectors to the control panel is transmitted via a radio frequency. Heat detectors that have been placed in the building are equipped with thermistors that are able to sense the heat. While carbon monoxide detectors are equipped to trace the presence of gas, smoke detectors are able to detect smoke or combustion particles.
In the event of a fire, the fire alarm panel then either activates the flashers or the sounders, turns on sprinklers, or makes a call to the fire department. If the fire alarm system is an addressable system, the source of the occurrence will be noted on the control panel.
Smart fire alarm systems can notify building owners or managers on their mobile device, altering them to the issue.
In many cases, the frequency a commercial fire alarm system needs to be tested will be set by local requirements. However, if local regulations do not state a frequency, then we suggest having your systems checked every 6 months to ensure they are functioning properly.
What to Look For in A Commercial Fire Alarm System
When it comes to choosing a commercial fire alarm system, you should consider factors like the size of your building, what features you want in your system, what local regulations you must adhere to, and most importantly what type of system works best for you.
Digital Provisions can help assess your needs and determine the best fire security system for your commercial building in Westchester County, and ensure that it meets all local regulations.
Once you have determined the type of fire alarm system you need for your building, you should also explore other available options – such as voice evacuation units, aspiration detection, or carbon monoxide detection – you may need.
Schedule A FREE Design Consultation Now
We are licensed and insured factory-trained business fire alarm systems installers. We always strive to forge lasting relationships with our clients, managing their building’s security. That’s why more and more businesses from Westchester County are choosing Digital Provisions as their fire alarm system company.
Contact us today for a FREE fire safety evaluation. Call 631-209-2600 or fill out our contact us form on this page.